Is your Nintendo Switch not turning on? And how to fix it? Don’t worry, this is a common problem that you can easily fix.
Nintendo Switch is a great gaming console that is perfect for gamers on the go. It has been designed to be taken from place to place, so you can play anywhere.
Unfortunately, sometimes it may not turn on, which can be very frustrating. There are many reasons that your Nintendo Switch won’t turn on. Nintendo Switch sometimes fails to turn on because of a low battery.
In today’s article, I’m going to show you Why Your Nintendo Switch won’t turn on and how to fix it if Nintendo Switch won’t turn on.
Without further ado, let’s get started!
Why Your Nintendo Switch won’t turn on?
After examining this issue in-depth, I found that there are a few reasons that will cause your Nintendo Switch to not turn on, and most aren’t serious. The following are possible reasons why your Nintendo Switch won’t turn on:
Drained Battery: If you are having troubles turning on your Nintendo Switch console, it’s probably due to a drained battery. In case you are a new switch user, you should know that it takes some time for the screen to light up when the console is put into charge mode if the battery is completely depleted. Ensure that you plug the charging cable into the console correctly, and leave it to charge for some time.
Charging Cord Problems: Often, the most common cause of consoles not turning on is problems with the charging cord. Look for any damages on your cable, and if you find one that is damaged, change it.
Firmware issue: Sometimes, a software issue with the firmware can lead to this particular problem. In this situation, I recommend that you should perform a force restart. Otherwise, you will have to perform a hard reset.
Hardware Failure: When none of the fixes in this article work, you can only conclude that you are dealing with a hardware failure. The only option you have in this situation is to take your console into the shop for repairs.
How To Fix if Nintendo Switch Won’t Turn On?
After considering every possibility that could cause this specific issue with your Nintendo Switch console, let’s examine some fixes you can try. The following are some troubleshooting tips that can help you fix a Nintendo Switch that won’t start:
Charge Your Nintendo Switch
The Nintendo charger that comes with the console is the best way to do this. It is essential to ensure that the charger is compatible and is known to work If you’re using a third-party charger.
For some consoles, all it takes is 30 minutes, but if it still won’t power on, charge it for at least 3 hours.
So, before going onto the next method, I highly recommend that let the Nintendo Switch charge for a few hours, then ensure it is fully charged. After that, check if the console cooperates and, if it doesn’t, proceed to the next method.
Check For Charging Cord Problems
It is common for Nintendo Switch’s charging cord to have problems, just like the majority of portable consoles.
The charging cord’s quality will degrade over time it doesn’t matter how careful you are (especially if you play while it is charging), so make sure it is not damaged.
If you don’t have a choice, use an official Nintendo Switch charging cable. A third-party cord may damage your console and deplete its battery long-term.
If you find out that your Nintendo Switch charging cord is damaged, I will strongly suggest that you replace your damaged or third-party charging cord with an official Nintendo Switch cable cord.
Check below for the next solution if you are sure your charging port isn’t the issue.
Perform A Soft Reset
After you’ve determined that it’s not a problem with the power charging cord, your next step should be to investigate a potentially corrupted firmware glitch.
It is possible that your console is experiencing an error that cannot be resolved by itself. If this is the case, your console may not respond.
You can fix the issue by performing a forced reset with the console connected to the charger. To turn your Nintendo Switch on using only the power button, follow these steps:
- For 12 to 15 seconds, press and hold down the power button.
- After that press the button 3 times quickly, but the third time you must hold it until the Nintendo Switch turns on.
- Then check if it gets past the initial screen.
Note: If you experience this issue again after using this fix successfully, you will likely need to perform the force restart every time you encounter it.
If this method is unable to resolve your issue, move on to the next method.
Perform A Hard Reset (Factory Reset)
Another thing that you can do is to perform a hard reset on your console, which is also known as a factory reset. It is one of the easiest solutions to resolve the Nintendo Switch not charging issue.
This method is effective in many situations when the console fails to start. Furthermore, it has been reported that factory resetting the Nintendo Switch improves performance. To perform a hard reset on your Nintendo Switch, follow these steps:
- To enter Maintenance Mode, press and hold the power button and volume up/down buttons simultaneously for 5 seconds.
- In Maintenance Mode, use the Joy-Con to navigate right to Initialize Console Without Deleting Save Data and then click OK.
Note: You can delete all saved data from your console by tapping Initialize Console.
- Follow the instructions, then turn on your Nintendo Switch again to see if it now works.
Contact Nintendo Support
If none of the above methods solves the issue and your Nintendo switch still won’t turn on, then it could be a hardware failure. You’ll need professional assistance.
Go to the Nintendo Official Website and post your question in the Forum. Someone from the authority will contact you as soon as possible.
FAQs
Can I Overcharge The Nintendo Switch?
No, you cannot overcharge the Nintendo switch. This is because when the console’s battery reaches 100% and it is still charging, it will use the electricity directly. It is important that you must not do so all the time as this can deplete the battery’s stamina.
What Can I Do When The Switch Is Stuck On A Black Screen?
You need to turn off the power button for 15 seconds when the console switch is stuck on a black screen. Once it’s done, hold the volume up/down buttons with power buttons simultaneously.
It will automatically boot into maintenance mode. Afterward, select initialize console and follow the instructions on-screen to complete the process.
Conclusion
As you can see above, I’ve discussed Some effective ways to fix Nintendo Switch that won’t turn on and I hope that your device has been repaired.
Contact the service center if you do not find all of these fixes working on your console. In the comments section, please let us know if you have any questions or if you encounter any other issues.
Thanks for visiting our website and enjoy your day!
Also, Read: 10+ Best DS Emulators for Windows and Mac
